|Place of Origin:||CHINA|
|Model Number:||25 X 1.6MM|
|Minimum Order Quantity:||Negotiation|
|Packaging Details:||Package As Customer's Request|
|Delivery Time:||45-50 Days After Confirmed|
|Payment Terms:||T/T Or L/C|
|Supply Ability:||50 Tons Per Month|
|Keywords:||Square Copper Boat Nails||Material:||Copper T2|
|Head Type:||Rose Head||Shank:||Square Shank|
|Wire Diameter:||1.6mm||Nail Length:||25mm|
|Apply For:||Wooden Boat||Color:||Natural|
copper boat nails,
copper nails for boat building
25MM X 1.6 Rose Head Hard Drawn Copper Square Boat Nails / Rivet
Copper Nails have a longer life expectancy than other types of nails.
They are Manufactured from 100% hard drawn copper, these square shank nails can be used as a rivet or for face nailing. These copper nails with the square shank provides greater holding "gripping" power than conventional round shank nails.
The raised rose head, as well as being very decorative, is stronger than any common flat headed nails, and assures positive centerline contact when bucking for riveting, providing a greater clamping / riveting force.
|Wire OD (mm)||1.6/2.0/2.15/2.36/2.65/2.8/3.0/3.25/3.75/4.8mm|
|Length (mm)||19/20/32/38/44/50/63/70/87/100/125/150 mm|
|other size produce according to customer's request|
Square copper nails are often combined with copper roves to create rivets. Copper rivets are an important component of traditionally-built boats as they are used to fasten the timber planks together and to internal frames. The square shaft of the copper nail is forced through the under-sized round hole of the rove, allowing the rove to grip the nail. The end of the copper nail is then snipped off to length and the excess copper is squashed (or peened) over the rove to create a lasting rivet that will be impervious to sea water and last for many years.
|Fits Nail Gauge||6g-14g|
|Delivery date||25days after deposit|
|Usage||with matching Traditional copper cut nails|